Do you rebuild your own atomizer coils? Do you have a lot of atomizing devices laying around and you don't have a clue as to their resistance? If so this Ohm Meter can simplify your life.
Safely test the resistance of your atomizers, cartomizers and clearomizers with this ohm meter. The device comes with standard 510 and 808 connectors. A 510 to EGO adapter is also included to test your EGO-threaded devices. Other adapters (not included in package) can be attached to test devices with other threads.
The LED on the meter will show a 1 on the left when it is first powered on and there is no atomizing device attached. If an atomizer is attached and the meter continues to read 1 then the atomizer is not creating a complete circuit and current is not flowing correctly through the device. The atomizer would need to be fixed before it could be used or discarded.
If there is continuity in the atomizer, the resistance will be displayed on the LED. This meter will read from 0.01 to 9.99 ohms and is accurate to +-0.2%. The current put through the atomizer is only 3 milliamps and will not damage the device you are testing.
This meter uses 2 AA batteries which are included. As stated above, an 510 to EGO adapter is also included.