This clearomizer has a capacity of 2.4 ml and has the shorter (not the real short) wicks. Please see the images.
This is a top feed clearomizer that provides a lot of vapor and a nice throat hit. When properly assembled there is no leaking with a fresh coil. However as the coil nears the end of it's life, you might experience some flooding that can cause leaking. Probably time to replace the coil if you are getting leaks in the mouthpiece or the bottom.
The Kanger T2 is an 510, Ego-threaded device so it will fit on 510 threaded Ego-style PVs without an adapter. It WILL require a 510 to Ego adapter for standard 510 personal vaporizers.
Due to the width of the connector an adapter may also be required for recessed well APVs that have EGO threads.
The advantage of the Kanger T2 is that the coil can be replaced easily and inexpensively. This clearomizer has 3 parts: the body, coil unit and a proprietary mouthpiece. The coil unit can be easily screwed on off, so that you can clean or replace the coil.
The Kanger T2 is 73 mm long and 15 mm in diameter.
1. Unscrew and remove the mouthpiece.
2. Fill with 2ml to 2.4ml of e-liquid. Be careful not to get any liquid in the center tube.
3. Screw the mouthpiece back on to clearomizer. Do not over tighten.
4. For the first fill, allow a minute or two for the e-liquid to be absorbed by the wicks and feed into the coil before you start vaping. If the wicks and coils are not saturated with e-liquid before you try to use the device, you might burn your wicks. That doesn't taste good.
The coil that ships with the Kanger T2 is either 1.8 ohms or 2.5. Replacement coils (shorter and long wicks) are available in 1.8, 2.2 and 2.5 ohm resistances.
The price shown is for one (1) Kanger T2 Clearomizer.
Our warranty on this device and all cartomizers is DOA only. If you have never used a clearomizer before, we suggest that you try one first before making a quantity purchase. Some people love clearomizers, others do not. We want you to be satisfied with every product we sell.