The Innokin iTaste MVP is a variable voltage, box style APV (advanced personal vaporizer) that includes an installed (and non-replaceable) 2600 mAh battery. This high capacity battery will give you hours and hours of vaping time between charges. As with all Innokin products there is excellent build-quality and outstanding performance.
This is a great looking device, available in silver, black and titanium blue. The all metal construction is sturdy and stylish. I have never been a big fan of box mods before, but the ITaste MVP feels great in your hand. it weighs 5.2 ounces (148 grams) and is 4.2 in (107 mm) tall including the threads. It is 1.6 inches wide (41 mm) and .8 inches (22 mm) deep.
The iTaste MVP electronic cigarette lets you adjust the voltage from 3.3 volts to 5 volts and has a 3 ampere current limit. This will satisfy almost all vaping enthusiasts. The battery is a built-in lithium-ion polymer 2600 mAh that also can function as a power bank to charge most any USB- or micro USB-enabled device as well as an iphone (not iphone 5) or ipad. The iTaste MVP also employs a pass-through charging system, which means you can charge and vape at the same time.
The iTaste MVP provides the following features and benefits:
- Compatible with almost any 510 or EGO-threaded device, including the Kanger T2 and T3 due to the enhanced threading
- Easily adjustable to find your perfect vaping voltage. Set it between 3.3 and 5.0 volts in .1 volt increments
- Monitor your usage with the built-in puff counter
- Vape for a long time with the 2600 mAh Polymer li-ion rechargeable battery
- Charge your mobile devices with the portable power source
- Monitor your remaining battery capacity with the LED indicators
- Safely carry and store the device (and save power) using the ON/OFF safety switch
- Charge the MVP e-cigarette while you vape with the pass-through feature
- Almost universal mobile device compatibility utilizing standard and micro USB 2.0 sockets
- Enhanced safety and device protection from short circuits, faulty atomizers / cartomizers, over-charge and over-discharge
- Plenty of current for most any vaping requirement
The Innokin iTaste MVP comes with everything you need to get started except for e-liquid. Each kit contains:
1 - Innokin iTaste MVP APV
1 - Innokin Dual Coil iClear 30 changeable coil tank clearomizer
1 - Charging / Power cable (USB, Mini USB, IPOD and IPhone connections)
1 - MVP thread cover
1 - English instruction manual
Using the iTaste MVP
To turn the MVP on you must press the power button 3 times. The LED in the power switch will flash in a red, yellow green sequence as the device powers on.
When you get the green light the MVP is ready to use.
As you use the device and press the power button to vape, it will initially be green. As the battery capacity diminishes the light will change to yellow. As the power is almost gone, the LED will change to red until finally it will flash twice and shut down. This indicates you have to attach the MVP to a power source to charge / use it.
ADJUSTING THE VOLTAGE
The VV display on the side of the MVP comes with a hard-to-detect, plastic screen protector. If your display appears to be scratched, don't worry, it is just the plastic. You can remove this protective cover if you choose.
Whenever either the V+ or V- button is pressed, the first item to be displayed is the puff counter. The puff counter keeps track of how many times you have pressed the power button. This counter will disappear in less than two seconds and then the current voltage setting will be displayed. You can use the V+ and the V- buttons to adjust the voltage accordingly.
CHARGING THE MVP
You use the supplied charging adapter to charge the device. Simply plug the USB end of the cable into any powered USB port on an electronic device or power adapter. Then plug the Micro USB plug on the charging adapter into the Input port on the bottom of the MVP.
It will take approximately 3.5 to 5.5 hours to fully charge the MVP. This will depend upon how much charge was remaining in the battery when you started to charge and whether you are using the device as a pass-through.
If the battery was heavily discharged the LEDs will display red for a short period of
time. Once the LED shows a steady green you can now use the MVP as a pass-through and vape while it charges. Be advised that using the MVP in pass-through mode can significantly increase the time it takes to achieve a fully charged state.
When the device has been fully charged the LED will go out and the MVP can be removed from the charger and used.
CHARGING MOBILE DEVICES
As stated above, the Itaste MVP can be used to charge / power mobile devices. Be advised that using this function will discharge your battery at a much faster rate than when just using it for normal vaping.
To use this functionality, first slide the Output ON/OFF switch to the ON position. This will activate the USB output port. Then simply connect the device you wish to power by plugging it into the Output USB port on the MVP.
When you are finished charging / powering the device, remove the cables and be sure to slide the Output switch back to the OFF position.